Pedal Craft Rebuilt Commercial Party Bike – 60V Lithium-Ion / 2,000W Electric Assist

This is not simply a used party bike with a fresh coat of paint. In 2025, this bike underwent an extensive frame-up mechanical rebuild by Urban Pedal Tours in collaboration with Pedal Craft MFG., incorporating years of experience operating, repairing, and improving commercial party bikes.

The bike was stripped back to its main structural frame, inspected, refinished and completely repainted. From there, the major mechanical, drivetrain, steering, braking, pedal and electric-assist systems were rebuilt or replaced using the Pedal Craft standard commercial mechanical system.

A major focus of the rebuild was the bike’s chassis and running gear. The bike received a new axle system, new kingpin/steering components, renewed braking components and extensive replacement of the associated bearings, shafts, hubs, mounts and hardware. These upgrades were intended to create a stronger, more dependable platform capable of handling the weight and repetitive stop-and-go operation associated with commercial party bike service.

The pedal drivetrain was also extensively renewed. Bottom brackets, pedal assemblies, seat posts, drive shafts, bearings, chains, sprockets and related drivetrain components were replaced or rebuilt, with quality Shimano bicycle components incorporated throughout the pedal system where applicable.

As shown in the rebuild photographs, the drivetrain uses a centralized shaft-and-chain configuration that transfers power from the individual pedal stations into the bike’s main drive system. The layout was designed around mechanical simplicity, accessibility and serviceability, allowing many drivetrain components to be inspected, adjusted or replaced without requiring specialized proprietary systems.

60V Lithium-Ion Electric Drive

The rebuilt bike is equipped with a 60V lithium-ion battery system and powerful 2,000W electric drive motor integrated into the Pedal Craft drivetrain.

Electric assistance provides additional power for starting from a stop, hills, heavier passenger loads and general commercial operation, substantially reducing the amount of pedal effort required from passengers.

The operator has dedicated controls for the electric drive system, including motor ON/OFF and forward/reverse operation, along with a separate 12V accessory electrical system. The operator console also provides control of lighting and other electrical accessories.

Built for Commercial Operation — and Proven for a Full Season

Perhaps most importantly, this rebuild has already been tested where it matters: in actual commercial service.

Following completion of the rebuild in 2025, the bike was returned to Urban Pedal Tours’ fleet and operated for a complete commercial season.

This provided a full season of real-world testing of the new axle and steering system, drivetrain, braking system, pedal components and 60V electric-assist system. The bike demonstrated itself to be a highly reliable commercial platform following the rebuild.

For a buyer, this means the bike is not an unfinished prototype or a newly assembled machine that has never operated commercially. The rebuilt systems have already been put through a season of passenger service.

Major Rebuild & Equipment Highlights

• Extensive frame-up rebuild completed in 2025

• Front and Back Speakers and Bluetooth Receiver
  

• Main frame stripped, prepared and completely repainted

• New axle system

• New kingpin and steering components

• Renewed braking system and components

• New/replaced axle, steering and chassis bearings and hardware as applicable

• Pedal Craft standard commercial mechanical system

• Extensively rebuilt pedal and main drivetrain

• New/replaced drive shafts and shaft bearings

• New/replaced bottom brackets

• New/replaced chains and sprockets

• New/replaced pedal assemblies and related components

• Shimano bicycle components used throughout the pedal system where applicable

• New/replaced seat posts and associated hardware

• 60V lithium-ion battery system

• 2,000W electric drive motor

• Forward and reverse electric drive

• Dedicated 12V accessory electrical system

• Operator-controlled lighting and electrical accessories

• Full commercial canopy

• Commercial passenger seating and individual pedal stations

• Designed around accessible, serviceable mechanical components

• Operated successfully for a complete commercial season following the rebuild

A Substantially Rebuilt Commercial Platform

A significant amount of the value in this bike is underneath the bodywork. The photographs taken during the rebuild show the extent of the work performed on the chassis, drivetrain, shafts, bearings, steering, electrical drive and pedal systems before the bike was returned to service.

For an existing party bike operator, this represents an opportunity to acquire a commercially proven bike with many of its most important mechanical systems substantially renewed, rather than purchasing an older fleet vehicle and immediately undertaking a major mechanical overhaul.

For a new operator, it provides an established commercial platform combining passenger pedal power with a 60V / 2,000W electric-assist system, commercial running gear and a drivetrain designed specifically around the demands of party bike operation.

Condition of Sale

This is a used commercial party bike and has completed a season of commercial operation following its 2025 rebuild. Cosmetic wear, scratches and other signs of normal commercial use should therefore be expected and can be seen in the provided photographs.

The party bike and all associated equipment are sold AS IS, WHERE IS, with no warranties or guarantees, expressed or implied. Bidders are responsible for reviewing all photographs, specifications and condition information and are encouraged to inspect the bike prior to bidding where possible.