2014 New Holland H7230 Mower Conditioner

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.2014 New Holland H7230 Mower Conditioner10’4″ Single-Cut Discbine in Very Good ConditionLocation: Drayton, ON• Manufacturer: New Holland• Model: H7230• Year: 2014• Cutting Width: 10’4″## Current Reported Status• General Condition: Overall very good condition; the only noted blemish is a bent right-hand cover.• Cutter Bar: Timing reported as very good.• Hubs: Equipped with ShockPRO hubs.• Conditioning Rolls: Rubber rolls in good condition.• PTO: 540 RPM.• Drive Belt and Components: Reported in good condition.• Ownership: Second owner; low usage.• Storage: Shedded when not in use.• Reason for Selling: Seller upgraded to a front-mount mower for their tractor.## Manufacturer’s Original Specifications*The following data represents the general engineering standards for the New Holland H7230 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.*| Feature | Specification ||—|—|| Cutting Width | 10’4″ (3.15 m) || Conditioning System | Rubber Rolls || PTO Speed | 540 RPM || Hitch Type | Category II 3-Point || Hub System | ShockPRO || Min. HP Requirement | Approx. 70–90 HP |## Ideal for:A solid match for small to mid-sized hay operations running 70–100 HP tractors. The H7230 is well-suited for mixed hay or alfalfa operations where rubber conditioning rolls and a clean 10’4″ cut deliver consistent dry-down without leaf loss. Second-owner, low-use history with shed storage puts this unit well above average condition for its age. The bent RH cover is cosmetic and is the only reported concern.## The New Holland H7230 Advantage:New Holland’s H-series Discbine mower conditioners are among the most reliable single-unit mowing platforms in Ontario’s hay country. The ShockPRO hub system absorbs rock strikes and impact loads without transmitting force to the cutterbar frame, extending the working life of the disc carrier and knives compared to conventional hub configurations. Rubber roll conditioning is particularly valued in leafy crop applications, preserving nutrient content and minimizing leaf shatter during the conditioning pass.Make it yours! Bidding opens Thursday, May 21rd @ 12:00 AM EST and lots begin to close Wednesday, May 27th @ 1:01 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Top Products

John Deere 2555

10,000 hrsLoaderSerial: CD42390751683Type: 4233DL008Inspections welcome in Blyth

Top Products

International Harvester 786

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.International Harvester 786 TractorSolid running IH 786; just under 6,500 hours; recent work completed; known issues disclosed.Location: St. GeorgeManufacturer: International HarvesterModel: 786Hours: Just under 6,500Remotes: 2PTO: Dual PTOHitch: 3-pointTransmission: Torque Amplifier (TA)## Current Reported Status- Hours: Just under 6,500- Overall: Reported as a good, solid running tractor- Recent Work: Injector return lines replaced (slight leak remains); new alternator; fresh oil change with new filters; fresh coolant with new coolant filter; muffler elbow welded and reinforced; new stainless exhaust pipe- Known Issues: Slight leak on injector return lines; loose pivot pin on front axle; one rear tire should be replaced but still holds air; common 86 series shifter slop- Inclusions: 1 new oil filter and 2 new fuel filters included- Ownership: Current owner has had it for 1 year; purchased as a raking tractor; plans changed## Manufacturer’s Original SpecificationsThe following data represents the general engineering standards for the International Harvester 786 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.| Feature | Specification ||—|—|| Engine | IH D-358, 6-cylinder diesel, approx. 86 HP || Transmission | Torque Amplifier, 8-speed forward || PTO | Dual — 540 / 1000 RPM || Hydraulics | 2 remotes || Hitch | Category II 3-point || Electrical | 12-volt |## Ideal for:The IH 786 is a practical utility tractor for a livestock or mixed operation that needs a reliable mid-horsepower diesel for raking, baling support, feeding, or general field work. At just under 6,500 hours with recent service completed and known issues transparently disclosed, this is a tractor a buyer can evaluate clearly and price accordingly.The torque amplifier transmission is particularly useful for hay and forage work — on-the-go power shifting without a full clutch engagement reduces operator fatigue and improves field efficiency. Dual PTO covers both 540 and 1000 RPM implements.## The International Harvester 786 Advantage:The IH 86 series tractors are among the most trusted and well-supported diesel platforms ever built for Canadian farm conditions. The D-358 engine is known for pulling well, and the 86 series drivetrain has a strong reputation for longevity. Parts availability across Ontario is excellent, and independent mechanics with 86 series experience are common.The known issues on this unit — return line seep, loose pivot pin, one soft rear tire, and the typical 86 series shifter play — are well-understood, manageable items on this platform, not structural concerns. The transparency of the disclosure is a positive signal.Make it yours! Bidding opens Wednesday, May 21st at 12:00 AM and lots begin to close Tuesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bidFor shipping, delivery or pickup information, click the ASK A Question Button.

Top Products

John Deere 7200 Maxemerg 2

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.John Deere 7200 MaxEmerge 2 Planter12-row folding planter with eSet meter upgrades and monitor included.Location: ListowelManufacturer: John DeereModel: 7200 MaxEmerge 2Configuration: 12-row foldingUpgrades: eSet meter upgradesMonitor: Included## Current Reported Status- Configuration: 12-row folding- Meter Upgrades: eSet meters installed- Monitor: Included- General: No defects reported by consignor## Manufacturer’s Original SpecificationsThe following data represents the general engineering standards for the John Deere 7200 MaxEmerge 2 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.| Feature | Specification ||—|—|| Rows | 12 || Row Spacing | 30″ (standard) || Frame | Folding || Meter Type | eSet (upgraded) || Drive | Ground drive (standard) || Monitor | Included |## Ideal for:The John Deere 7200 MaxEmerge 2 is a well-regarded planter platform suited for cash crop operations planting corn on 30-inch rows. The 12-row folding configuration is a practical match for mid-sized farms — wide enough to maintain planting efficiency without requiring a permit-width transport setup.The eSet meter upgrade is a meaningful improvement over the original finger pickup meters — eSet meters use an electric drive on each row unit, allowing variable rate seeding, better singulation at higher speeds, and per-row shutoff capability. The monitor included means the buyer has a complete, functional system ready to plant.## The John Deere 7200 Advantage:The 7200 MaxEmerge 2 is one of the most common and best-supported row crop planters in Ontario. Parts availability is strong through both dealer and aftermarket channels, and most agronomists and equipment technicians are familiar with the platform. The MaxEmerge 2 row unit itself is a proven design known for consistent depth control and down pressure management.With eSet meters installed, this unit is closer in capability to a current-generation planter than a standard 7200 — making it a high-value upgrade path for operations not yet ready to invest in a new machine.Make it yours! Bidding opens Wednesday, May 21st at 12:00 AM and lots begin to close Tuesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bidFor shipping, delivery or pickup information, click the ASK A Question Button.

Top Products

2000 CaseIH MX100C MFD and Loader, Low Hours

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.2000 Case IH MX100C MFWD Tractor with LoaderA Case IH MX100C MFWD utility tractor with loader, reported low hours and recent service work.Location: Lakefield- Manufacturer: Case IH- Model: MX100C- Year: 2000- Drive: MFWD (mechanical front wheel drive)- Loader: Equipped- Reported Hours: 1,300## Current Reported Status- Hours: 1,300 original hours reported- Maintenance: Fresh oil change- Electrical: New batteries- Tires: Approximately 100 hours on rear tires- Mechanical Status: Reported as an excellent running tractor## Manufacturer’s Original Specifications*The following data represents the general engineering standards for the Case IH MX100C at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.*| Feature | Specification ||—|—|| Engine | Case 4.5L 4-cylinder diesel || Engine Power | Approx. 96 PTO HP || Transmission | 16F / 12R synchromesh (12×12 powershuttle optional) || Drive Configuration | MFWD (4WD front axle) || PTO Speed | 540 / 1000 RPM || Hydraulics | Open-centre, multiple remotes available |## Ideal for:The MX100C is a strong fit for mixed livestock and crop operations that need a dependable mid-frame tractor for daily loader work, hay handling, and lighter tillage. The MFWD axle paired with the factory loader makes it practical for chores, bedding, and yard duty year-round.With reported low hours and recent service, this unit is suited to a buyer looking for a tractor that can go straight into use without immediate shop time — a good replacement candidate for an aging utility tractor in a small to mid-sized operation.## The Case IH Advantage:The MX series — sometimes referred to as the “Maxxum” generation — earned a reputation as one of Case IH’s most reliable utility platforms. Built on a heavy cast frame with a stout 4.5L engine and a well-regarded synchromesh transmission, the MX100C has held its value well in the used market thanks to straightforward mechanics and parts availability.Case IH dealer support across Ontario remains strong for the MX line, and the platform is widely recognized as a sensible step up from compact tractors for operators who want loader capability and PTO power in a single package.Make it yours! Bidding starts Thursday, May 21st and lots begin to close Wednesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Top Products

2012 John Deere 997 Lawn Mower

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.2012 John Deere 997 Zero-Turn MowerCommercial-grade zero-turn with a 72″ deck and hydraulic lift.Location: AtwoodManufacturer: John DeereModel: 997Year: 2012Deck: 72″ with hydraulic liftRoll Bar: IncludedFuel Type: Diesel## Current Reported Status- Reported Hours: Approximately 2,000 hours- Overall Condition: Reported in good condition; everything works as it should- Tires: Approximately 60% remaining- Accessories: Includes one key and roll bar- Recent Maintenance: Spindle bearing replaced (left side), hydraulic lift button replaced, all deck wheels replaced, caster wheel caps replaced; fluids checked and grease fittings serviced- Use History: Used on a 1.25-acre property- Delivery: Seller will deliver for a fee; forks available on-site to assist loading onto a trailer; ramps preferred- Payment: Cash or cheque accepted; pickup by appointment, Monday through Saturday- Seller Note: Mechanically inclined; can assist with routine service questions## Manufacturer’s Original Specifications| Feature | Specification ||—|—|| Engine | Kawasaki FX1000V, 35 HP || Deck Width | 72″ (7-Iron PRO) || Cutting Heights | 1″ to 5″ || Drive System | Hydrostatic, dual EZT || Fuel Capacity | Approximately 12 U.S. gallons || Weight | Approximately 1,580 lbs |The following data represents the general engineering standards for the John Deere 997 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.## Ideal for:The John Deere 997 is built for operators who maintain large, open turf areas where cut quality and productivity are the priority. At 72 inches wide, this machine is best suited for properties of two acres or more — commercial landscapers, golf course support, municipality work, or hobby farms with open lawns benefit most from this platform.With 2,000 hours, recent component replacements, and a reported clean mechanical bill of health, this unit represents a practical commercial mower at a used price. It is well-suited for a buyer looking to get straight to work this season without the wait of sourcing parts or performing deferred maintenance.## The John Deere 997 Advantage:John Deere’s 900 series zero-turns are purpose-built for commercial use, and the 997 sits at the top of that lineup. The 7-Iron PRO deck is one of the most durable and respected decks in the commercial mowing industry — precision stamped, heavy gauge, and designed for consistent cut quality across varied grass conditions. The Kawasaki FX1000V engine is a proven workhorse known for longevity well beyond 2,000 hours with proper maintenance.Unlike residential or prosumer machines, the 997 features a full commercial frame, commercial-grade hydrostatic drives, and is engineered for daily-use cycles. Its resale value holds well in the used market, particularly for units with documented maintenance and no outstanding mechanical concerns.Make it yours! Bidding opens Wednesday, May 21st at 12:00 AM and lots begin to close Tuesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bidFor shipping, delivery or pickup information, click the ASK A Question Button.

Top Products

Hopper grain trailer

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.Hopper Grain Trailer — Lead B-TrainLead unit of a B-train hopper configuration; working brakes, lights, and tarp.Location: ElmiraType: Hopper grain trailer — B-train lead unitBrakes: OperationalTires: Reported decentTarp: Good tarp includedSlopes: Front and rear slopes replaced approximately 2 years agoLights: Operational## Current Reported Status- Brakes: Reported working- Tires: Reported decent- Tarp: Good condition- Slopes: Front and rear slopes replaced approximately 2 years ago- Lights: Reported working- Configuration: Lead unit of a B-train hopper set## Manufacturer’s Original SpecificationsThe following data represents general specifications for a hopper grain trailer of this type and may not reflect specific modifications or the current mechanical state of this unit.| Feature | Specification ||—|—|| Configuration | B-train lead unit || Body Type | Hopper grain || Brakes | Air brakes || Tarp | Roll tarp system || Slopes | Front and rear hopper slopes || Lights | DOT lighting |## Ideal for:This trailer is suited for a grain operation that moves bulk product by road and needs a working B-train lead unit. With brakes, lights, tarp, and recently replaced slopes all reported in serviceable condition, this is a functional piece of transport equipment rather than a project.A buyer already running a B-train setup looking for a replacement lead, or an operation building out its on-farm transport capacity, would be the natural fit here.## The B-Train Hopper Advantage:B-train hopper configurations are a common and efficient choice for bulk grain haulage in Ontario, offering higher payload capacity than a single trailer while remaining within highway legal limits when properly configured. The lead unit carries the fifth wheel connection for the pup trailer, making its structural integrity the key factor in the combination’s road worthiness.Recently replaced front and rear slopes address one of the most common wear points on an older hopper — the areas most exposed to grain abrasion over years of loading cycles.Make it yours! Bidding opens Wednesday, May 21st at 12:00 AM and lots begin to close Tuesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bidFor shipping, delivery or pickup information, click the ASK A Question Button.

Top Products

2014 Freightliner M2 with Reefer

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.

2014 Freightliner M2 Reefer Truck
A medium-duty refrigerated truck in full working order, capable of both hot and cold temperature control.

Location: Elora

• Manufacturer: Freightliner
• Model: M2
• Year: 2014
• VIN: 3ALHCYCY7EDFZ6420
• Engine: Cummins
• Transmission: Automatic

## Current Reported Status
• Mechanical Condition: Reported in full working condition; used by the seller the week prior to listing.
• Refrigeration Unit: Fully operational — runs both hot and cold.
• Tires: Approximately 60% tread remaining.
• Air Brakes: Equipped.
• Air Ride Suspension: Equipped.
• Safety Certificate: Valid through November 2026.
• Reason for Selling: Seller no longer hauling potatoes.

## Manufacturer’s Original Specifications
The following data represents the general engineering standards for the Freightliner M2 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.

Feature | Specification
Class | Class 6–7 Medium Duty
Engine | Cummins (confirm displacement at inspection)
Transmission | Automatic
Brakes | Air Brakes
Suspension | Air Ride
Date of Manufacture | December 2013
Safety Expiry | November 2026

## Ideal for:
A working reefer truck with a valid safety certificate and a Cummins engine is a low-friction entry point for a small to mid-size produce, food service, or perishable goods operation. Hot and cold capability provides flexibility across different cargo types. The Freightliner M2 platform is the most common medium-duty truck in Canada, meaning parts and service are available in virtually every city and town in Ontario.

## The Freightliner M2 Advantage:
The Freightliner M2 Business Class has been the backbone of medium-duty trucking in Canada since 2002, built specifically for vocational duty cycles — refrigerated delivery, flatbed, and service body applications. It combines a low-entry cab with the Cummins powertrain, widely considered the most serviceable engine in its class. The M2 parts and service network in Ontario is mature and well-supported, with dealer and independent shop coverage across the province. A valid safety through November 2026 means a buyer can put it to work before facing any regulatory costs.

Make it yours! Bidding opens Thursday, May 21rd @ 12:00 AM EST and lots begin to close Wednesday, May 27th @ 1:00 PM EST.
Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.
See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Top Products

2015 440 Steiner

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.2015 Steiner 440Articulating utility tractor with a new Kohler gas engine installed.Location: ArthurManufacturer: SteinerModel: 440Year: 2015Engine: Brand new 32.5 HP Kohler gas (replaced)Hours on Machine: 750## Current Reported Status- Hours: 750 hours on the machine- Engine: Brand new 32.5 HP Kohler gas engine installed- Overall Condition: Reported in great condition## Manufacturer’s Original SpecificationsThe following data represents the general engineering standards for the Steiner 440 at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.| Feature | Specification ||—|—|| Engine | 32.5 HP Kohler gas || Drive | Four-wheel drive, articulating || Steering | Articulated centre-pivot || PTO | Front and rear || Hydraulics | Open-centre hydraulic system || Weight | Approximately 2,200 lbs |## Ideal for:The Steiner 440 is built for operators who need to work on sloped, irregular, or tight terrain where a conventional tractor is impractical. Its articulating four-wheel drive design keeps all four wheels on the ground on uneven surfaces, making it well-suited for golf courses, municipalities, cemeteries, hobby farms, and acreage properties.With a new engine installed and 750 hours on the machine, this unit is positioned for continued reliable work. Front and rear PTO compatibility means it can run a wide range of Steiner-compatible attachments across multiple seasons.## The Steiner 440 Advantage:Steiner built its reputation on the articulating tractor concept — a platform designed specifically for slope stability and tight-radius manoeuvrability. The 440 is one of the more capable models in the lineup, offering genuine four-wheel traction in a compact, operator-friendly package.A new Kohler engine removes the biggest variable in any used machine purchase. The engine is the most significant mechanical cost centre, and having it replaced means a buyer is largely acquiring the hours-on-airframe benefit at a meaningful value.Make it yours! Bidding opens Wednesday, May 21st at 12:00 AM and lots begin to close Tuesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bidFor shipping, delivery or pickup information, click the ASK A Question Button.

Top Products

2007 Chevy C4500

2007 Chevy C4500 2wd  Clean truck. nice 10ft flat bed with Gooseneck ball clean interior 233,000 KMNote: buyers are responsible for verifying the options and mechanical condition prior to bidding.2007 Chevy Kodiak C4500 Flat Deck Medium-Duty Work Truck; 10ft Flatbed & New Front Shocks Location: Acton Manufacturer: Chevrolet Model: C4500 Kodiak Year: 2007233000kmCurrent Reported Status:General Condition: Described as a “good running truck.”Deck: Equipped with a 10ft flat deck.Cab Features: Both heat and A/C are reported to be in working order.Mechanical: New front shocks recently installed.Tires: Seller reports that the truck needs steer tires.Manufacturer’s Original Specifications:The following data represents the general engineering standards for the 2007 Chevy C4500. As a used unit, condition is as is, where is and may require general maintenance.Engine Options: Typically equipped with the 6.6L Duramax V8 Turbo Diesel or 8.1L Vortec V8 Gas.Transmission: Often paired with a heavy-duty Allison automatic transmission.GVWR: Generally rated at 16,500 lbs to 17,500 lbs (Class 4/5).Brakes: Hydraulic 4-wheel disc brakes with ABS.Chassis: High-strength steel frame designed for vocational upfitting.Ideal for: Landscapers, contractors, or equipment haulers needing a platform more robust than a standard one-ton pickup. The C4500 “Kodiak” chassis is specifically designed for high-payload flatbed applications, urban deliveries, and towing heavy gooseneck trailers.The Chevy Advantage: The Kodiak C4500 offers a “best of both worlds” scenario: medium-duty hauling capacity with a tight turning radius and visibility that mimics a smaller pickup. Because it shares powertrain components with the Silverado HD line, engine parts are widely available and service is straightforward. Its sloped hood design provides industry-leading forward visibility, making it a favorite for navigating tight job sites and residential areas.Answers to Questions:Is this truck pre def:  Yes it isIs this a gas or diesel truck and how many kms since last safety Diesel truck, think it was safety 2 years ago not many km since thenMake it yours! Bidding starts Thursday, May 21st and lots begin to close Wednesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Top Products

Cactus plant in brown diamond planter

Newest Products

Cactus plant white Cup

Newest Products

Cactus plant In white and pink planter

Newest Products

Parts truck 2011 Ford F150 5.0L 4×4 289,000 km Runs and drive 4×4 works. motor, rear end, 4×4 transfer case, 6 speed transmission. No radio no grill. Needs rockers and exhaust manifold. full kenwood Xcelon door speakers was wired for a complete sound system. Has air lift on rear

Newest Products

International 4700 low profile. Shorten frame and wheelbase. Hook ups for fifth wheel and gooseneck hitch’s. Four door, bench seat, seats, front and back. Six speed manual transmission rebuilt, three years ago. Runs and drives great.

Subject to sellers approval 

Newest Products

Cat PC206 Cold Planer

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.2008 Cat PC206 Cold PlanerA Caterpillar PC206 skid steer cold planer attachment, reported low hours and one owner.Location: Essex- Manufacturer: Caterpillar (Cat)- Model: PC206- Year: 2008- Type: Cold planer / asphalt milling attachment- Carrier Requirement: High-flow skid steer## Current Reported Status- Hours: Reported as low hours- Ownership: One-owner unit- Condition: Reported in good condition- Carrier Requirement: Requires a skid steer equipped with high-flow auxiliary hydraulics## Manufacturer’s Original Specifications*The following data represents the general engineering standards for the Cat PC206 Cold Planer at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.*| Feature | Specification ||—|—|| Cutting Width | Approx. 6 inches (PC206 nominal) || Cutting Depth | Up to approx. 5 inches || Drum Type | Standard pick / conical tooth drum || Side Shift | Hydraulic side shift || Hydraulic Requirement | High-flow (approx. 30–40 GPM) || Mount | Skid steer / compact track loader quick attach |## Ideal for:The PC206 is a practical fit for small to mid-sized paving, utility, and municipal contractors who need to mill out patches, trenches, and transitions without bringing in a full-size road milling machine. The compact footprint allows it to work in tight spaces such as driveways, parking lots, and curb cuts.A one-owner, low-hour cold planer is the kind of attachment that lets a general-purpose skid steer take on asphalt repair work it would otherwise need to be rented for — a sensible addition for contractors looking to broaden the services they offer in-house.## The Caterpillar Advantage:Cat work tools are engineered as a matched system with Cat host machines, with hydraulic specs, mounting plates, and control interfaces designed to work cleanly together. The PC series cold planers are a long-running product line that benefit from Cat’s global dealer and parts network — drum picks, bearings, and seals are widely supported.The Cat brand carries strong recognition on the resale market for attachments of this type, and the PC206 in particular is well known among small paving and utility contractors as a reliable, serviceable cold planer.Make it yours! Bidding starts Thursday, May 21st and lots begin to close Wednesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Newest Products

Massey Ferguson 1840 bale thrower

Note: buyers are responsible for verifying the options and mechanical condition prior to bidding.Massey Ferguson 1840 Bale ThrowerA Massey Ferguson 1840 bale thrower attachment, reported in great shape with all components to run on a baler.Location: Acton- Manufacturer: Massey Ferguson- Model: 1840 (bale thrower attachment)- Type: Hydraulic bale thrower / kicker for small square baler- Condition: Reported in great shape## Current Reported Status- Condition: Reported in great shape- History: Acquired by the seller as part of a baler purchase- Completeness: Includes all components reported needed to run on a buyer’s baler- Sale Reason: Seller no longer requires it as part of their operation## Manufacturer’s Original Specifications*The following data represents the general engineering standards for the Massey Ferguson 1840 bale thrower at the time of manufacture and may not reflect specific modifications or the current mechanical state of this unit.*| Feature | Specification ||—|—|| Bale Type | Small square bales || Drive | Hydraulic || Mounting | Designed to mount on a Massey Ferguson 1840 small square baler || Throw Distance | Adjustable belt speed for varying wagon distance || Use | Loading wagons directly from the baler || Operator Benefit | Eliminates manual stacking on the wagon |## Ideal for:A bale thrower is best suited to small square bale operations that move volume — custom hay operations, dairy and horse hay producers, or anyone running long days behind the baler and tired of having a person ride the wagon stacking by hand.For an operator already running (or about to buy) a Massey Ferguson 1840 baler, picking up a thrower already configured for that baler is a meaningful labour-saver. It turns a two- or three-person hay crew into a one-person job in many cases.## The Massey Ferguson Advantage:The Massey Ferguson 1840 is one of the most widely used small square balers in North America, and the matching thrower attachment is a known, supported package. Parts and reference material remain easy to find, and operators familiar with the 1840 platform tend to stay on it for that reason.Massey Ferguson hay tools have a long-standing reputation among small square producers for straightforward mechanics and reliable knotters, and the 1840 thrower combination remains a standard setup on many Ontario hay farms.Make it yours! Bidding starts Thursday, May 21st and lots begin to close Wednesday, May 27th at 1:00 PM EST.Ask the seller any questions by clicking the “? ASK A QUESTION” button in grey on this page.See past auction results > Past Auctions > Select Auction. OR email info@consign.bid

Newest Products

18×8 foot aluminum trailer with rear ramp door insulated 50 AMP WIRING dual side doors roof racks etc etc … barely used

Subject to sellers approval 

Newest Products

Pottinger novacat 3507t hay conditioner recent new cut bar has not had very much use

Newest Products

What happens after the auction? Did it sell?

This is the process for items that we are looking for a buyer after the auction.
 
Consign.bid auctions are very open and transparent between sellers and buyers. If a deal is made after the auction concludes, the Buyer’s Premium and Sales Commission are expected to be paid if the purchaser was a bidder or person inquiring about the item
 

Auction
 

The highest bidder is invited into the Post Auction Portal – 9 P.M. cut-off
 

Open to bidders – per lot starting at 9:01 P.M.
 

Buy Now – Monday morning following the auction
 

Newest Products

Variety of Florals

Random Products

NHL Hockey Note Pad

Random Products

Antique Cobalt Blue Glass Eye Wash Cup

Random Products

Laptop cooling pad

Random Products

Limited Edition Nascar Coin Bank with lock

Random Products

Hardcover Young Adult Novels (5)

Random Products

Western themed picture frame

Random Products

Quick drive screw

Random Products

1920s Seth Thomas 8 day Tambour Clock

Random Products

Large selection of Hockey and baseball cards

Random Products

Husky THD950L Wet saw and stand

No Bids Yet

Cuisinart Folding Grilling set

No Bids Yet

Pneumatic Impact driver & Impact Sockets

No Bids Yet

Marvel Go on a Mission Loblaws Universe Cards

No Bids Yet

Assorted DVDs

No Bids Yet

Diecast 1:64 Model cars

No Bids Yet

Lic. Nascar Diecast model cars

No Bids Yet

Souvenir State/Province Sticker Album

No Bids Yet

1938/39 GE H-50 Radio

No Bids Yet

Windsor Derby Dishes

4 x 5pc place settings plus extras

No Bids Yet